What Voltage Does the G138 Series Require? A Complete Electrical Guide
One of the most common questions growers ask before purchasing LED grow lights is whether the fixture will work with their existing electrical system. The Koray G138 series — available in three lengths (G138-60, G138-90, and G138-120) — answers this concern with one of the widest voltage compatibility ranges in the industry: AC100-277V. This means a single G138 model can be used in homes, commercial greenhouses, and industrial plant factories without any external transformer or voltage converter.

Understanding the AC100-277V Range
Modern LED grow lights need a driver that converts AC mains power to the DC voltage required by the LED chips. The quality and range of this driver determine where the light can be used. The G138 series uses a high-efficiency, built-in driver that accepts any voltage between 100V and 277V AC at 50/60Hz. Here is how that maps to real-world electrical systems:
In North American residential settings, standard outlets deliver 120V. The G138-60 and G138-90 plug directly into these circuits — no wiring changes needed. This makes them ideal for home growers running shelf-based systems for succulents, herbs, or small vegetable starts.
In North American commercial buildings, lighting circuits often run at 208V or 240V (three-phase). The G138-120 connects directly to these higher voltages, which is advantageous because higher voltage means lower current draw for the same wattage, reducing the load on circuit breakers.
In European and Asian regions where 220-240V is standard, the G138 series works natively. Koray Lighting has been exporting to over 60 countries since 2009, and the G138’s universal voltage is one reason the product line has been so widely adopted internationally.
Why Voltage Range Matters for Commercial Growers
Commercial greenhouse and vertical farm operators often have 277V wiring (derived from 480V three-phase systems). Many LED grow lights on the market require 240V and cannot operate at 277V, forcing growers to install step-down transformers. The G138 series eliminates this cost entirely. At 277V, the current draw is even lower than at 240V, which means less heat in the wiring and the ability to run more fixtures on a single circuit.

Power Factor: The Hidden Electrical Parameter
Beyond voltage range, the power factor (PF) is a critical electrical specification that many growers overlook. The G138 series maintains a PF above 0.9 across its entire voltage range. A low power factor (below 0.8) means the fixture draws more current than necessary to produce the same light output, which can cause:
Higher electricity bills due to reactive power charges from utility companies. Overheated wiring and circuit breakers. Voltage drops across long cable runs, common in large greenhouse installations. The G138’s high PF ensures that the electrical infrastructure is used efficiently, which is especially important when you are powering dozens or hundreds of bars in a commercial facility.
Practical Wiring Scenarios
For a home shelf setup using G138-60 bars: On a standard 120V/15A circuit (1,800W capacity), you can safely run multiple G138-60 bars. Each bar draws roughly 20-40W depending on the spectrum, so you could connect 20 or more bars on a single circuit with plenty of headroom.
For a commercial vertical farm using G138-120 bars: At 277V, each G138-120 draws even less current than at 240V. This allows you to daisy-chain more units per circuit, reducing the total number of home runs back to the electrical panel. Koray Lighting’s engineering team recommends consulting with a licensed electrician for installations exceeding 80% of a circuit’s rated capacity, per NEC guidelines.
For greenhouse supplemental lighting: The G138-120 can be wired directly to 240V or 277V lighting circuits already present in most commercial greenhouses. Since no transformer is needed, installation cost per fixture is lower compared to lights that require voltage conversion.
Comparison with Competitors
Many budget LED grow bars on the market only support AC100-240V. While this covers most residential and international use cases, it excludes 277V commercial wiring — a dealbreaker for large-scale operations. The G138 series’ 277V compatibility gives it a distinct advantage in commercial environments. Additionally, Koray Lighting’s driver design maintains consistent LED output and spectrum regardless of input voltage, meaning your plants receive the same PPFD whether you are running at 120V or 277V.
Key Takeaways
The Koray G138 series (G138-60, G138-90, G138-120) operates on AC100-277V with a power factor above 0.9, making it one of the most electrically versatile grow bars available. Whether you are a home grower with 120V outlets, a commercial greenhouse operator with 240V circuits, or a vertical farm engineer working with 277V three-phase power, the G138 series installs directly without transformers. Combined with Koray Lighting’s 15 years of LED engineering expertise and over 200 patents, the G138 series delivers reliable, efficient lighting across any electrical environment.
Leave A Comment