
Overview
The RX-G5025 ‘Octopus’ is Koray’s one-piece six-bar K6 array lamp — 600 W of plant light built as six parallel bars on a central spine and shipped fully assembled, so it hangs as a single rigid unit straight out of the box. Koray describes it as an economical plant light module and array lamp with a new reflective concentrating design (patent pending) that sends directional light down over a uniform square footprint, and positions it for indoor medicinal-plant cultivation: the official page says the spectrum is chosen to meet the light requirements of medicinal plants and stimulate the accumulation of medicinal ingredients. Officially the K6 array delivers 1500 µmol/s of photosynthetic photon flux — the spec table reads 254 µmol/s × 6 — reaches up to 1100 µmol/m²/s at the 0.15 m test distance, and runs fanless with no assembly: plug and play. All figures below come from the official RX-G5025 product page and the official spec table published on that page.
Key Specifications
| Parameter | RX-G5025-K6 ‘Octopus’ six-bar array (K6) |
|---|---|
| Series | RX-G5025 series: single-bar module RX-G5025 (36–108 W) and six-bar array RX-G5025-K6 (this product) |
| Array form | Rigid one-piece array: six parallel aluminum bars on a central spine; one row of round lensed LED clusters per bar |
| Array dimensions | 1205 × 1203 × 100 mm (47″ × 47″ × 3.9″) — square footprint of about 1.2 × 1.2 m |
| Spectral type | F15 (official code 35K24R2); the single-bar module is also offered as F16 (35K24R1FR1) |
| Photosynthetic photon flux (PPF) | 254 µmol/s × 6 = 1500 µmol/s (official row) |
| PPFD at distance (official) | 1100 µmol/m²/s (68,559 Lx) at 0.15 m; 987 µmol/m²/s at 0.3 m; 726 µmol/m²/s at 0.5 m |
| Efficacy | 2.5 µmol/J |
| Power | 610 W at the AC230V test input (official spec table); page copy 600 W/AC230V and 550 W/AC110V |
| Driver | ELGC-300 ×2 (official spec-table comment) |
| Light emitting angle | 90° |
| Cooling / acoustics | Fanless silent design (official page) |
| Recommended irradiation distance | 0.2–0.5 m, ‘for medicinal planting / for shelf planting’ (official) |
| Waterproofing | Not waterproof as standard; IP65 available as a customization (official) |
| Lifespan / environment | Surface temperature rise Tc 20 K; operating −30 °C to +40 °C; 50,000 h life (Ta ≤ 25 °C); optical/electrical tolerance ±10% |
| Installation / packaging | Plug and play, no assembly; hangs horizontally from two suspension cables |
| Certifications / warranty | CE / RoHS / FCC; 3-year warranty |
| Applications | Indoor planting of medicinal plants; shelf planting (official); low-canopy medicinal-herb and shelf crops |
One Rigid Array: Six Bars on a Central Spine
The product photo shows the whole architecture in one glance. Six long silver aluminum extrusions run parallel to one another — each single-bar module measures 1203×50×29 mm and carries one row of round lensed LED clusters — and are joined on a central spine into one square array of 1205×1203×100 mm (47″ × 47″ × 3.9″). A boxy driver housing holding the two ELGC-300 drivers sits at one end of the spine, and two thin suspension cables carry the whole unit, which hangs horizontally with the six bars facing the crop below.
Because the bars arrive factory-joined as one K6 array, there is no on-site assembly and no wiring work between bars: the drivers are already mounted in the end housing. Koray’s official page calls the unit plug and play — hang it, connect the mains, and the array lights as one square field of directional light.
1500 µmol/s from 254 µmol/s × 6, Delivered Low
The K6 array is built to hang close above the crop. The official spec table sets the recommended irradiation distance at 0.2–0.5 m with the note ‘for medicinal planting / for shelf planting’, and the published PPFD figures are measured in exactly that band: 1100 µmol/m²/s (68,559 Lx) at 0.15 m, 987 µmol/m²/s at 0.3 m and 726 µmol/m²/s at 0.5 m. Koray credits the high readings to the patent-pending reflective concentrating design, which gathers the light of the six bars and directs it straight down through a 90° emitting angle, so one array keeps a high PPFD across its roughly 1.2 × 1.2 m footprint instead of wasting radiation sideways. Photosynthetic photon flux is officially 254 µmol/s × 6 = 1500 µmol/s at an efficacy up to 2.5 µmol/J — a 600 W class array that still rewards every watt with photons.

Fanless and Plug-and-Play
The K6 array runs without a fan. Koray’s official page describes a fanless silent design, which matters when a 600 W array hangs at head height just 0.2–0.5 m above a bench: there is no fan noise to manage in the growing room. The unit is not waterproof as standard, so if the room is humid, order the IP65-customized version. It carries CE / RoHS / FCC certification and a 3-year warranty. Official environmental data: surface temperature rise Tc 20 K, operating −30 °C to +40 °C, 50,000 h life at Ta ≤ 25 °C, optical/electrical tolerance ±10%.

Installation: Two Cables, 0.2–0.5 m Above the Crop
Installation is a two-step job. Attach the two thin suspension cables to a ceiling or rack structure so the array hangs horizontally — the six bars parallel to the bench below — with the lensed clusters pointing straight down at the canopy. Position the array 0.2–0.5 m above the plants, the official recommended distance for medicinal planting and shelf planting, so each roughly 1.2 × 1.2 m bench or tray area sits inside the square footprint of the array. The K6 runs at 600 W on AC230V or 550 W on AC110V (610 W at the official AC230V test input); it ships assembled with no loose parts and no assembly step.

FAQ
Q: What exactly is the RX-G5025 ‘Octopus’?
Koray’s one-piece six-bar array lamp: six parallel aluminum bars on a central spine, shipped assembled as one 600 W K6 unit with a square footprint of about 1.2 × 1.2 m (official array dimension 1205×1203×100 mm). The official page name is ‘Octopus Led Grow Light RX-G5025 600W’.
Q: How many bars does the K6 array have?
Officially six — the spec-table PPF row reads 254 µmol/s × 6 = 1500 µmol/s at up to 2.5 µmol/J, and the ‘K6’ name itself means the six-bar array.
Q: How much PPFD does it deliver?
The official table lists 1100 µmol/m²/s (68,559 Lx) at 0.15 m, 987 µmol/m²/s at 0.3 m and 726 µmol/m²/s at 0.5 m.
Q: How close to the plants should it hang?
0.2–0.5 m — the official recommended irradiation distance, stated on the spec table as ‘for medicinal planting / for shelf planting’.
Q: Does it need assembly or a fan?
No. It is plug and play with no assembly, and the design is fanless and silent. It is not waterproof as standard; IP65 is available as a customization for humid rooms.
Q: Which crops is it for?
Koray positions the RX-G5025 especially for indoor planting of medicinal plants and for shelf planting — a close-hung, high-PPFD primary light for low-canopy medicinal herbs and shelf crops.
Why Choose Koray
Koray (Zhongshan Koray Photoelectric Co., Ltd.) has designed and manufactured commercial LED grow lights since 2008, serving 1,000+ professional growers in 20+ countries and holding 300+ patents. Every figure in this article comes from the official Koray product page or the official spec table published on that page — visit koraylights.com to request samples or full test reports.
Leave A Comment