
Overview
The RX-G120-2H is Koray’s 630 W dual-channel medicinal array light — a rigid ladder-frame rectangular array with an official dimension of 1192 × 1086 × 100 mm (47″ × 43″ × 4″), built around one idea: two spectrum channels that match the two stages of a medicinal-plant crop. CH1 is a 4000 K white channel for vegetative growth (300 W); CH2 layers dark red 660 nm and far-red 730 nm onto a 3000 K base for flowering and maturity (330 W); with both channels on, the RX-G120-2H is rated at 1750 µmol/s of PPF and up to 1207 µmol/m²/s at 0.2 m. Koray’s official page sells the light as a 1-to-1 replacement of a 1000 W HPS lamp for medicinal plant growth, and backs it with three retrofit-friendly features: IP65 waterproofing, a universal 100–305 V input, and an RJ45 network-cable dimming socket compatible with the Horti Guru intelligent APP control system. Every figure in this article comes from the official RX-G120-2H product page and the official English spec table published on that page.
Key Specifications
| Parameter | RX-G120-2H dual-channel medicinal array light |
|---|---|
| Series / model | RX-G120-2H — dual-channel medicinal plant array light |
| Array dimensions | 1192 × 1086 × 100 mm (47″ × 43″ × 4″) |
| CH1 — vegetative stage | 4000 K · PPF 840 µmol/s · PPFD 545 µmol/m²/s at 0.2 m / 384 at 0.5 m · 300 W |
| CH2 — flowering stage | 3000 K + 660 nm + 730 nm · PPF 910 µmol/s · PPFD 649 µmol/m²/s at 0.2 m / 468 at 0.5 m · 330 W |
| CH1 + CH2 — bloom & harvest | PPF 1750 µmol/s · PPFD 1207 µmol/m²/s at 0.2 m / >850 at 0.5 m · 630 W |
| Efficacy / page claims | Light efficiency up to 2.7 µmol/J; CH1 PPFD up to 500 µmol/m²/s; both channels up to 1200 µmol/m²/s |
| LED source | Samsung LM301 and Osram horticultural LEDs |
| Waterproofing | IP65 (official page bullet) |
| Input voltage / power | 100–305 V; rated power 630 W |
| Dimming / control | RJ45 network-cable dimming socket, compatible with the Horti Guru intelligent APP control system |
| Environment / life | Operating −30 °C to +40 °C; 50,000 h life (Ta 25 °C); tolerance ±10% (‘for reference only’) |
| Certifications | CE / RoHS / FCC |
Two Channels, Two Stages: Vegetative on CH1, Flowering on CH1 + CH2
The RX-G120-2H keeps the lighting decision simple: run CH1 alone while the crop is in vegetative growth, then bring up CH2 for flowering and maturity. Officially CH1 is a 4000 K white channel rated at 300 W and 840 µmol/s of PPF; CH2 carries 330 W and 910 µmol/s in a flowering mix that layers 660 nm dark red and 730 nm far-red onto a 3000 K base — Koray’s page notes the far-red lamp beads are set in CH2 specifically for inducing flowering. With both channels on, PPF sums to 1750 µmol/s at the rated 630 W, and the official spec table lists 1207 µmol/m²/s at 0.2 m and more than 850 µmol/m²/s at 0.5 m for the bloom-and-harvest stage.
Koray builds the channel stack with Samsung LM301 and Osram horticultural LEDs and rates light efficiency up to 2.7 µmol/J. The array itself is the ladder-frame silhouette shown in the official product photo: two outer rails carrying parallel aluminium light bars, with a central driver housing running between them — a clean layout that hangs horizontally with the light directed straight down onto the bench or row below.

The 1000 W HPS Replacement: 630 W, IP65, 100–305 V
The official page is explicit about the market job: the RX-G120-2H is a 1-to-1 replacement of a 1000 W HPS lamp. Everything about the hardware is aimed at making that swap painless inside an operating facility. The input stage accepts 100–305 V, so the same fixture runs on the low- and high-voltage grids found across different regions without a special order. The housing is sealed to IP65, which covers the water and humidity that are routine when a medicinal-herb room is washed down or when wet-tolerant crops are grown. And the whole light is one rigid array — no separate ballast box to relocate and no lamp to re-seat inside a reflector.
The economics follow from the official numbers: the RX-G120-2H delivers 1750 µmol/s at its rated 630 W, and the official bloom-stage PPFD of 1207 µmol/m²/s at 0.2 m — still above 850 µmol/m²/s at 0.5 m — covers the bench heights at which medicinal-plant flowering runs. A facility replacing 1000 W HPS lamps keeps 1:1 fixture spacing while drawing 630 W per fixture, with no re-lamping through the life of the array.
Fleet Dimming over RJ45 with the Horti Guru App
Dimming on the RX-G120-2H is a network function, not a knob on the fixture. The array carries an RJ45 network-cable dimming socket, and the official page states it is compatible with the Horti Guru intelligent APP control system. In a multi-bay facility that means each RX-G120-2H can be wired into a control network and addressed from one app screen — setting intensity, schedules and stage changes across many fixtures instead of walking the room to adjust drivers one by one. The page does not bundle the app or claim it ships with the light; the RJ45 socket is the hardware interface and the Horti Guru system is the compatible control layer.
Operationally, the two-channel design complements network control. A grower can hold a whole room in the vegetative stage on CH1 alone, then switch the fleet to CH1 + CH2 when the crop moves into flowering — one rule for every fixture, set from the control system.
Built for Indoor Medicinal-Herb Facilities
The RX-G120-2H is an indoor array light for medicinal-herb cultivation facilities: benches and rows of medicinal herbs run through vegetative growth under the 4000 K channel, then flower under the warm-white-plus-red blend of CH1 + CH2 — the moment the official spec table labels ‘bloom and harvest’. The IP65 housing and universal input are the retrofit credentials; the two-stage channel plan and the RJ45 network socket are the day-to-day operating tools. The fixture’s official PPFD figures are measured at 0.2 m and 0.5 m, so hanging the array so the canopy sits inside that band reproduces the published values.

FAQ
Q: What exactly is the RX-G120-2H?
Koray’s 630 W dual-channel medicinal array light (official dimension 1192 × 1086 × 100 mm, 47″ × 43″ × 4″): a ladder-frame array with a 4000 K vegetative channel (CH1) and a 3000 K + 660 nm + 730 nm flowering channel (CH2), in an IP65 housing with 100–305 V input.
Q: How does the two-channel staging work?
CH1 alone for vegetative growth (4000 K, 300 W); CH1 + CH2 together for flowering and maturity — CH2 adds dark red 660 nm and far-red 730 nm to a 3000 K base to induce and drive flowering.
Q: Can it really replace a 1000 W HPS lamp?
That is the official positioning: a 1-to-1 replacement of a 1000 W HPS lamp. The all-channels-on rating is 1750 µmol/s at 630 W with 1207 µmol/m²/s at 0.2 m and more than 850 µmol/m²/s at 0.5 m.
Q: How is the RX-G120-2H dimmed?
Through the RJ45 network-cable dimming socket on the fixture, which is compatible with the Horti Guru intelligent APP control system for networked, app-based intensity and scheduling.
Q: Is it waterproof?
IP65 is claimed on the official page, and the input stage accepts 100–305 V — the retrofit pair for wet, washdown-tolerant indoor cultivation rooms on any common grid.
Q: Which crops is it for?
Medicinal plants and medicinal herbs grown indoors in benches or rows — the two-stage channel plan is built around their vegetative and flowering stages in a whole-facility retrofit.
Why Choose Koray
Koray (Zhongshan Koray Photoelectric Co., Ltd.) has designed and manufactured commercial LED grow lights since 2008, serving 1,000+ professional growers in 20+ countries and holding 300+ patents. Every figure in this article comes from the official Koray product page or the official English spec table published on that page — visit koraylights.com to request samples or full test reports.
Leave A Comment