Koray PT8T waterproof T8 tube grow light

Overview

Vertical farms and hydroponic leafy-green operations run on thin margins, and lighting is their largest recurring energy cost. The Koray PT8T is a waterproof T8 tube grow light engineered for this environment: high PPFD per watt, IP66 protection for humid grow rooms, and spectra that measurably cut energy use. All figures below come from Koray’s official PT8/PT8T spec sheets (factory-measured, tolerance ±10%).

Key Specifications

Parameter RX-PT8 (no lens) RX-PT8T (F175) RX-PT8T (V3)
Dimensions (L×W×H) 1200 × 33 × 35 mm 1200 × 33 × 35 mm 1200 × 33 × 35 mm
Spectrum F4K F175 V3
PPFD @ 0.15 m 270 µmol/m²/s 365 µmol/m²/s 416 µmol/m²/s
PPFD @ 0.2 m 196 µmol/m²/s 275 µmol/m²/s 316 µmol/m²/s
PPFD @ 0.3 m 126 µmol/m²/s 185 µmol/m²/s 210 µmol/m²/s
Luminous flux 6600 lm 5200 lm 3900 lm
PPF 90 µmol/s 86 µmol/s 93 µmol/s
Power 36 W 32 W 32 W (PPE 2.9 µmol/J)
Input AC100–240V, PF > 0.9 AC100–240V, PF > 0.9 AC100–240V, PF > 0.9
Best for Tissue culture / seedlings Full cycle (vegetative + flowering) Fast-growing flowering crops

The series is rated IP66 waterproof, with a lifespan of 35,000 hours (Ta ≤ 25 °C), operating temperature −10 to 30 °C, and up to 10 tubes linkable in series for long rack runs. Dimming is supported via Koray GS8P / DM25 controllers.

Energy Efficiency

Per Koray’s spec sheet, the F175 spectrum saves about 24% of energy — roughly 51 kWh per tube per year — versus conventional T8 tubes, while the V3 spectrum saves about 33% (approximately 70 kWh per tube per year). The V3 delivers an average PPFD of 300 µmol/m²/s at a 0.3 m mounting height with only 133 W/m² of power density. On a multi-tier rack with dozens of tubes, these per-tube savings compound quickly into the operating budget.

PT8T grow light in vertical farm lettuce cultivation

PPFD and Spectrum Performance

Koray’s secondary optics on the PT8T increase PPFD and spread light evenly across the canopy, avoiding the central hot spot typical of bare-diode tubes. Measured values: the V3 reaches 416 µmol/m²/s at 0.15 m and 316 µmol/m²/s at 0.2 m; the F175 reaches 365 µmol/m²/s at 0.15 m and 275 µmol/m²/s at 0.2 m — enough intensity for full-cycle leafy greens grown close to the light.

PT8T grow light illuminating hydroponic leafy greens
PT8T T8 tube grow light optional spectrum chart

Waterproofing and Durability

Hydroponic and plant-factory environments are humid, with irrigation splash and condensation on every surface. The IP66-rated housing keeps the driver and LED board protected, and the 35,000-hour rated lifespan reduces replacement cycles on continuous 12–18 h/day schedules.

Applications

  • Vertical farms and plant factories
  • Hydroponic leafy greens and herbs
  • Strawberry shelf / multi-tier cultivation
  • Tissue culture and seedling raising (PT8 non-lens model)
  • Controlled environments requiring dimming (GS8P / DM25)

PT8T F175 spectrum
PT8T V3 spectrum

FAQ

Q: How much can the PT8T save on electricity?
Per Koray’s spec sheet, the F175 saves about 24% (≈51 kWh per tube per year) and the V3 saves about 33% (≈70 kWh per tube per year) compared with conventional T8 grow tubes.

Q: Can it be mounted close to the canopy?
Yes. Even light distribution through Koray secondary optics means the V3 still provides 316 µmol/m²/s at just 0.2 m, without a burning hot spot.

Q: Is it safe in humid grow rooms?
Yes. The fixture carries an IP66 waterproof rating, so it withstands high humidity, irrigation splash and condensation.

Q: Where do these figures come from?
All values are from Koray’s official PT8/PT8T spec sheet (factory-measured; tolerance ±10%). Contact Koray for full test data.

Why Choose Koray

Koray (Zhongshan Koray Photoelectric Co., Ltd.) has designed and manufactured commercial LED grow lights since 2008, serving 1,000+ professional growers in 20+ countries with 300+ patents. The product is certified CE / RoHS / FCC and backed by factory test data. Visit koraylights.com to request samples or full test reports.